Bars

> Bars

    We can build any type of handlebar which you want to. The height, width, angles, specifications, details - no limits. We can do them only from + 4pc. Possibly 2pc - 4pc look like. Bars can also be designed to have maximum grip/lever room if that is what you need. Bars can be made so that they are flat when upright in the stem or they can also have upwards sweep so that the ends are higher than the middle. If you want upwards sweep, measure that in degrees also. Bars come Raw for free. A powdercoat color cost $ extra. We can build a stem-bar combo to. We were the first who built a combo with tubes not directly linked to stem-bar. Beloved bar with 'Chimera Full Tube System'.

Height : measured from middle of lower crossbar to the middle of the the grip tube.
Width : measured from end the end of the grip tubes.
Backsweep : Backsweep is the angle that bend bar back towards you.
Upsweep : is the angle that bend it up.
Cross bar height : measured from middle of lower crossbar to the middle of higher cross bar.
Stem offset : measured from the axis of the fork's steer tube to the axis of the straight portion of the bar.
Bar offset : an additional offset is possible. If the offset of the stem is too short for you, you can add an offset with the bar.